Go to the previous, next section.

Conditionals, loops and recursion

Macros, expanding to plain text, perhaps with arguments, are not quite enough. We would like to have macros expand to different things, based on decisions taken at run-time. E.g., we need some kind of conditionals. Also, we would like to have some kind of loop construct, so we could do something a number of times, or while some condition is true.

Testing macro definitions

There are two different builtin conditionals in m4. The first is ifdef:

ifdef(name, string-1, opt string-2)

which makes it possible to test whether a macro is defined or not. If name is defined as a macro, ifdef expands to string-1, otherwise to string-2. If string-2 is omitted, it is taken to be the empty string (according to the normal rules).

ifdef(`foo', "foo' is defined', "foo' is not defined')
=>foo is not defined
define(`foo', `')
=>
ifdef(`foo', "foo' is defined', "foo' is not defined')
=>foo is defined

The macro ifdef is recognized only with parameters.

Comparing strings

The other conditional, ifelse, is much more powerful. It can be used as a way to introduce a long comment, as an if-else construct, or as a multibranch, depending on the number of arguments supplied:

ifelse(comment)
ifelse(string-1, string-2, equal, opt not-equal)
ifelse(string-1, string-2, equal, ...)

Used with only one argument, the ifelse simply discards it and produces no output. This is a common m4 idiom for introducing a block comment, as an alternative to repeatedly using dnl. This special usage is recognized by GNU m4, so that in this case, the warning about missing arguments is never triggered.

If called with three or four arguments, ifelse expands into equal, if string-1 and string-2 are equal (character for character), otherwise it expands to not-equal.

ifelse(foo, bar, `true')
=>
ifelse(foo, foo, `true')
=>true
ifelse(foo, bar, `true', `false')
=>false
ifelse(foo, foo, `true', `false')
=>true

However, ifelse can take more than four arguments. If given more than four arguments, ifelse works like a case or switch statement in traditional programming languages. If string-1 and string-2 are equal, ifelse expands into equal, otherwise the procedure is repeated with the first three arguments discarded. This calls for an example:

ifelse(foo, bar, `third', gnu, gnats, `sixth', `seventh')
=>seventh

Naturally, the normal case will be slightly more advanced than these examples. A common use of ifelse is in macros implementing loops of various kinds.

The macro ifelse is recognized only with parameters.

Loops and recursion

There is no direct support for loops in m4, but macros can be recursive. There is no limit on the number of recursion levels, other than those enforced by your hardware and operating system.

Loops can be programmed using recursion and the conditionals described previously.

There is a builtin macro, shift, which can, among other things, be used for iterating through the actual arguments to a macro:

shift(...)

It takes any number of arguments, and expands to all but the first argument, separated by commas, with each argument quoted.

shift(bar)
=>
shift(foo, bar, baz)
=>bar,baz

An example of the use of shift is this macro, which reverses the order of its arguments:

define(`reverse', `ifelse($#, 0, , $#, 1, "$1",
			  `reverse(shift($@)), `$1")')
=>
reverse
=>
reverse(foo)
=>foo
reverse(foo, bar, gnats, and gnus)
=>and gnus, gnats, bar, foo

While not a very interesting macro, it does show how simple loops can be made with shift, ifelse and recursion.

Here is an example of a loop macro that implements a simple forloop. It can, for example, be used for simple counting:

forloop(`i', 1, 8, `i ')
=>1 2 3 4 5 6 7 8

The arguments are a name for the iteration variable, the starting value, the final value, and the text to be expanded for each iteration. With this macro, the macro i is defined only within the loop. After the loop, it retains whatever value it might have had before.

For-loops can be nested, like

forloop(`i', 1, 4, `forloop(`j', 1, 8, `(i, j) ')
')
=>(1, 1) (1, 2) (1, 3) (1, 4) (1, 5) (1, 6) (1, 7) (1, 8)
=>(2, 1) (2, 2) (2, 3) (2, 4) (2, 5) (2, 6) (2, 7) (2, 8)
=>(3, 1) (3, 2) (3, 3) (3, 4) (3, 5) (3, 6) (3, 7) (3, 8)
=>(4, 1) (4, 2) (4, 3) (4, 4) (4, 5) (4, 6) (4, 7) (4, 8)
=>

The implementation of the forloop macro is fairly straightforward. The forloop macro itself is simply a wrapper, which saves the previous definition of the first argument, calls the internal macro _forloop, and re-establishes the saved definition of the first argument.

The macro _forloop expands the fourth argument once, and tests to see if it is finished. If it has not finished, it increments the iteration variable (using the predefined macro incr, see section Decrement and increment operators), and recurses.

Here is the actual implementation of forloop:

define(`forloop',
       `pushdef(`$1', `$2')_forloop(`$1', `$2', `$3', `$4')popdef(`$1')')
define(`_forloop',
       `$4`'ifelse($1, `$3', ,
		   `define(`$1', incr($1))_forloop(`$1', `$2', `$3', `$4')')')

Notice the careful use of quotes. Only three macro arguments are unquoted, each for its own reason. Try to find out why these three arguments are left unquoted, and see what happens if they are quoted.

Now, even though these two macros are useful, they are still not robust enough for general use. They lack even basic error handling of cases like start value less than final value, and the first argument not being a name. Correcting these errors are left as an exercise to the reader.

Go to the previous, next section.