Go to the previous, next section.

Vi Commands

This chapter describes Vi commands other than Ex commands implemented in VIP. Except for the last section which discusses insert mode, all the commands described in this chapter are to be used in vi mode.

Numeric Arguments

Most Vi commands accept a numeric argument which can be supplied as a prefix to the commands. A numeric argument is also called a count. In many cases, if a count is given, the command is executed that many times. For instance, 5 d d deletes 5 lines while simple d d deletes a line. In this manual the metavariable n will denote a count.

Important Keys

The keys C-g and C-l are unique in that their associated functions are the same in any of emacs, vi and insert mode.

C-g

Quit. Cancel running or partially typed command (keyboard-quit).

C-l

Clear the screen and reprint everything (recenter).

In Emacs many commands are bound to the key strokes that start with C-x, C-c and ESC. These commands can be accessed from vi mode as easily as from emacs mode.

C-x

C-c

ESC

Typing one of these keys have the same effect as typing it in emacs mode. Appropriate command will be executed according as the keys you type after it. You will be in vi mode again after the execution of the command. For instance, if you type ESC < (in vi mode) then the cursor will move to the beginning of the buffer and you will still be in vi mode.

C

X

Typing one of these keys have the effect of typing the corresponding control character in emacs mode. Moreover, if you type an upper case character following it, that character will also be translated to the corresponding control character. Thus typing X W in vi mode is the same as typing C-x C-w in emacs mode. You will be in vi mode again after the execution of a command.

\

Escape to emacs mode. Hitting the \ key will take you to emacs mode, and you can execute a single Emacs command. After executing the Emacs command you will be in vi mode again. You can give a count before typing \. Thus 5 \ +, as well as \ C-u 5 +, will insert `+++++' before point.

Buffers and Windows

In Emacs the text you edit is stored in a buffer. See GNU Emacs Manual, for details. There is always one selected buffer which is called the current buffer.

You can see the contents of buffers through windows created by Emacs. When you have multiple windows on the screen only one of them is selected. Each buffer has a unique name, and each window has a mode line which shows the name of the buffer associated with the window and other information about the status of the buffer. You can change the format of the mode line, but normally if you see `**' at the beginning of a mode line it means that the buffer is modified. If you write out the content of the buffer to a file, then the buffer will become not modified. Also if you see `%%' at the beginning of the mode line, it means that the file associated with the buffer is write protected.

We have the following commands related to windows and buffers.

C-n

Move cursor to the next-window (vip-next-window).

X 1

Delete other windows and make the selected window fill the screen
(delete-other-windows).

X 2

Split current window into two windows (split-window-vertically).

X 3

Show current buffer in two windows.

s buffer RET

Select or create a buffer named buffer (vip-switch-to-buffer).

S buffer RET

Similar but select a buffer named buffer in another window
(vip-switch-to-buffer-other-window).

K

Kill the current buffer if it is not modified or if it is not associated with a file
(vip-kill-buffer).

X B

List the existing buffers (list-buffers).

As buffer name completion is provided, you have only to type in initial substring of the buffer name which is sufficient to identify it among names of existing buffers. After that, if you hit TAB the rest of the buffer name will be supplied by the system, and you can confirm it by RET. The default buffer name to switch to will also be prompted, and you can select it by giving a simple RET. See GNU Emacs Manual for details of completion.

Files

We have the following commands related to files. They are used to visit, save and insert files.

v file RET

Visit specified file in the current window (vip-find-file).

V file RET

Visit specified file in another window (vip-find-file-other-window).

X S

Save current buffer to the file associated with the buffer. If no file is associated with the buffer, the name of the file to write out the content of the buffer will be asked in the minibuffer.

X W file RET

Write current buffer into a specified file.

X I file RET

Insert a specified file at point.

g

Give information on the file associated with the current buffer. Tell you the name of the file associated with the buffer, the line number of the current point and total line numbers in the buffer. If no file is associated with the buffer, this fact will be indicated by the null file name `""'.

In Emacs, you can edit a file by visiting it. If you wish to visit a file in the current window, you can just type v. Emacs maintains the default directory which is specific to each buffer. Suppose, for instance, that the default directory of the current buffer is `/usr/masahiko/lisp/'. Then you will get the following prompt in the minibuffer.

visit file: /usr/masahiko/lisp/

Use V instead of v, if you wish to visit a file in another window.

You can verify which file you are editing by typing g. (You can also type X B to get nformation on other buffers too.) If you type g you will get an information like below in the echo area:

"/usr/masahiko/man/vip.texinfo" line 921 of 1949

After you edited the buffer (`vip.texinfo', in our example) for a while, you may wish to save it in a file. If you wish to save it in the file associated with the buffer (`/usr/masahiko/man/vip.texinfo', in this case), you can just say X S. If you wish to save it in another file, you can type X W. You will then get a similar prompt as you get for v, to which you can enter the file name.

Viewing the Buffer

In this and next section we discuss commands for moving around in the buffer. These command do not change the content of the buffer. The following commands are useful for viewing the content of the current buffer.

SPC

C-f

Scroll text of current window upward almost full screen. You can go forward in the buffer by this command (vip-scroll).

RET

C-b

Scroll text of current window downward almost full screen. You can go backward in the buffer by this command (vip-scroll-back).

C-d

Scroll text of current window upward half screen. You can go down in the buffer by this command (vip-scroll-down).

C-u

Scroll text of current window downward half screen. You can go up in the buffer by this command (vip-scroll-up).

C-y

Scroll text of current window upward by one line (vip-scroll-down-one).

C-e

Scroll text of current window downward by one line (vip-scroll-up-one).

The following commands reposition point in the window.

z H

z RET

Put point on the top (home) line in the window. So the current line becomes the top line in the window. Given a count n, point will be placed in the n-th line from top (vip-line-to-top).

z M

z .

Put point on the middle line in the window. Given a count n, point will be placed in the n-th line from the middle line (vip-line-to-middle).

z L

z -

Put point on the bottom line in the window. Given a count n, point will be placed in the n-th line from bottom (vip-line-to-bottom).

C-l

Center point in window and redisplay screen (recenter).

Mark Commands

The following commands are used to mark positions in the buffer.

m ch

Store current point in the register ch. ch must be a lower case character between a and z.

m <

Set mark at the beginning of current buffer.

m >

Set mark at the end of current buffer.

m .

Set mark at point.

m ,

Jump to mark (and pop mark off the mark ring).

Emacs uses the mark ring to store marked positions. The commands m <, m > and m . not only set mark but also add it as the latest element of the mark ring (replacing the oldest one). By repeating the command `m ,' you can visit older and older marked positions. You will eventually be in a loop as the mark ring is a ring.

Motion Commands

Commands for moving around in the current buffer are collected here. These commands are used as an `argument' for the delete, change and yank commands to be described in the next section.

h

Move point backward by one character. Signal error if point is at the beginning of buffer, but (unlike Vi) do not complain otherwise (vip-backward-char).

l

Move point backward by one character. Signal error if point is at the end of buffer, but (unlike Vi) do not complain otherwise (vip-forward-char).

j

Move point to the next line keeping the current column. If point is on the last line of the buffer, a new line will be created and point will move to that line (vip-next-line).

k

Move point to the previous line keeping the current column (vip-next-line).

+

Move point to the next line at the first non-white character. If point is on the last line of the buffer, a new line will be created and point will move to the beginning of that line (vip-next-line-at-bol).

-

Move point to the previous line at the first non-white character (vip-previous-line-at-bol).

0

Move point to the beginning of line (vip-beginning-of-line).

^

Move point to the first non-white character on the line (vip-bol-and-skip-white).

$

Move point to the end of line (vip-goto-eol).

n |

Move point to the n-th column on the line (vip-goto-col).

w

Move point forward to the beginning of the next word (vip-forward-word).

W

Move point forward to the beginning of the next word, where a word is considered as a sequence of non-white characters (vip-forward-Word).

b

Move point backward to the beginning of a word (vip-backward-word).

B

Move point backward to the beginning of a word, where a word is considered as a sequence of non-white characters (vip-forward-Word).

e

Move point forward to the end of a word (vip-end-of-word).

E

Move point forward to the end of a word, where a word is considered as a sequence of non-white characters (vip-end-of-Word).

H

Move point to the beginning of the home (top) line of the window. Given a count n, go to the n-th line from top (vip-window-top).

M

Move point to the beginning of the middle line of the window. Given a count n, go to the n-th line from the middle line (vip-window-middle).

L

Move point to the beginning of the lowest (bottom) line of the window. Given count, go to the n-th line from bottom (vip-window-bottom).

(

Move point backward to the beginning of the sentence (vip-backward-sentence).

)

Move point forward to the end of the sentence (vip-forward-sentence).

{

Move point backward to the beginning of the paragraph (vip-backward-paragraph).

}

Move point forward to the end of the paragraph (vip-forward-paragraph).

G

Given a count n, move point to the n-th line in the buffer on the first non-white character. Without a count, go to the end of the buffer (vip-goto-line).

` `

Exchange point and mark (vip-goto-mark).

` ch

Move point to the position stored in the register ch. ch must be a lower case letter.

' '

Exchange point and mark, and then move point to the first non-white character on the line (vip-goto-mark-and-skip-white).

' ch

Move point to the position stored in the register ch and skip to the first non-white character on the line. ch must be a lower case letter.

%

Move point to the matching parenthesis if point is looking at (, ), {, }, [ or ]
(vip-paren-match).

The following commands are useful for moving points on the line. A count will repeat the effect.

f ch

Move point forward to the character ch on the line. Signal error if ch could not be found (vip-find-char-forward).

F ch

Move point backward to the character ch on the line. Signal error if ch could not be found (vip-find-char-backward).

t ch

Move point forward upto the character ch on the line. Signal error if ch could not be found (vip-goto-char-forward).

T ch

Move point backward upto the character ch on the line. Signal error if ch could not be found (vip-goto-char-backward).

;

Repeat previous f, t, F or T command (vip-repeat-find).

,

Repeat previous f, t, F or T command, in the opposite direction (vip-repeat-find-opposite).

Searching and Replacing

Following commands are available for searching and replacing.

/ string RET

Search the first occurrence of the string string forward starting from point. Given a count n, the n-th occurrence of string will be searched. If the variable vip-re-search has value t then regular expression search is done and the string matching the regular expression string is found. If you give an empty string as string then the search mode will change from vanilla search to regular expression search and vice versa (vip-search-forward).

? string RET

Same as /, except that search is done backward (vip-search-backward).

n

Search the previous search pattern in the same direction as before (vip-search-next).

N

Search the previous search pattern in the opposite direction (vip-search-Next).

C-s

Search forward incrementally. See GNU Emacs Manual for details (isearch-forward).

C-r

Search backward incrementally (isearch-backward).

R string RET newstring

There are two modes of replacement, vanilla and regular expression. If the mode is vanilla you will get a prompt `Replace string:', and if the mode is regular expression you will ge a prompt `Replace regexp:'. The mode is initially vanilla, but you can toggle these modes by giving a null string as string. If the mode is vanilla, this command replaces every occurrence of string with newstring. If the mode is regular expression, string is treated as a regular expression and every string matching the regular expression is replaced with newstring (vip-replace-string).

Q string RET newstring

Same as R except that you will be asked form confirmation before each replacement
(vip-query-replace).

r ch

Replace the character point is looking at by the character ch. Give count, replace that many characters by ch (vip-replace-char).

Modifying Commands

In this section, commands for modifying the content of a buffer are described. These commands affect the region determined by a motion command which is given to the commands as their argument.

We classify motion commands into point commands and line commands. The point commands are as follows:

h, l, 0, ^, $, w, W, b, B, e, E, (, ), /, ?, `, f, F, t, T, %, ;, ,

j, k, +, -, H, M, L, {, }, G, '

Delete Commands

d motion-command

Delete the region determined by the motion command motion-command.

It is also possible to save the deleted text into a register you specify. For example, you can say " t 3 d w to delete three words and save it to register t. The name of a register is a lower case letter between a and z. If you give an upper case letter as an argument to a delete command, then the deleted text will be appended to the content of the register having the corresponding lower case letter as its name. So, " T d w will delete a word and append it to register t. Other modifying commands also accept a register name as their argument, and we will not repeat similar explanations.

We have more delete commands as below.

d d

Delete a line. Given a count n, delete n lines.

d r

Delete current region.

d R

Expand current region and delete it.

D

Delete to the end of a line (vip-kill-line).

x

Delete a character after point. Given n, delete n characters (vip-delete-char).

DEL

Delete a character before point. Given n, delete n characters (vip-delete-backward-char).

Yank Commands

Yank commands yank a text of buffer into a (usually anonymous) register. Here the word `yank' is used in Vi's sense. Thus yank commands do not alter the content of the buffer, and useful only in combination with commands that put back the yanked text into the buffer.

y motion-command

Yank the region determined by the motion command motion-command.

Use the following command to yank consecutive lines of text.

y y

Y

Yank a line. Given n, yank n lines (vip-yank-line).

y r

Yank current region.

y R

Expand current region and yank it.

Put Back Commands

p

Insert, after the character point is looking at, most recently deleted/yanked text from anonymous register. Given a register name argument, the content of the named register will be put back. Given a count, the command will be repeated that many times. This command also checks if the text to put back ends with a new line character, and if so the text will be put below the current line (vip-put-back).

P

Insert at point most recently deleted/yanked text from anonymous register. Given a register name argument, the content of the named register will be put back. Given a count, the command will be repeated that many times. This command also checks if the text to put back ends with a new line character, and if so the text will be put above the current line rather than at point (vip-Put-back).

Change Commands

Most commonly used change command takes the following form.

c motion-command

Replace the content of the region determined by the motion command motion-command by the text you type. If the motion command is a point command then you will type the text into minibuffer, and if the motion command is a line command then the region will be deleted first and you can insert the text in insert mode.

c c

Change a line. Given a count, that many lines are changed.

c r

Change current region.

c R

Expand current region and change it.

Repeating and Undoing Modifications

VIP records the previous modifying command, so that it is easy to repeat it. It is also very easy to undo changes made by modifying commands.

u

Undo the last change. You can undo more by repeating undo by the repeat command `.'. For example, you can undo 5 previous changes by typing `u....'. If you type `uu', then the second `u' undoes the first undo command (vip-undo).

.

Repeat the last modifying command. Given count n it becomes the new count for the repeated command. Otherwise, the count for the last modifying command is used again (vip-repeat).

Other Vi Commands

Miscellaneous Vi commands are collected here.

Z Z

Exit Emacs. If modified buffers exist, you will be asked whether you wish to save them or not (save-buffers-kill-emacs).

! motion-command format-command

n ! ! format-command

The region determined by the motion command motion-command will be given to the shell command format-command and the region will be replaced by its output. If a count is given, it will be passed to motion-command. For example, `3!Gsort' will sort the region between point and the 3rd line. If ! is used instead of motion-command then n lines will be processed by format-command (vip-command-argument).

J

Join two lines. Given count, join that many lines. A space will be inserted at each junction (vip-join-lines).

< motion-command

n < <

Shift region determined by the motion command motion-command to left by shift-width (default is 8). If < is used instead of motion-command then shift n lines
(vip-command-argument).

> motion-command

n > >

Shift region determined by the motion command motion-command to right by shift-width (default is 8). If < is used instead of motion-command then shift n lines
(vip-command-argument).

= motion-command

Indent region determined by the motion command motion-command. If = is used instead of motion-command then indent n lines (vip-command-argument).

*

Call last remembered keyboard macro.

#

A new vi operator. See section Some New Commands, for more details.

The following keys are reserved for future extensions, and currently assigned to a function that just beeps (vip-nil).

&, @, U, [, ], _, q, ~

VIP uses a special local keymap to interpret key strokes you enter in vi mode. The following keys are bound to nil in the keymap. Therefore, these keys are interpreted by the global keymap of Emacs. We give below a short description of the functions bound to these keys in the global keymap. See GNU Emacs Manual for details.

C-@

Set mark and push previous mark on mark ring (set-mark-command).

TAB

Indent line for current major mode (indent-for-tab-command).

LFD

Insert a newline, then indent according to mode (newline-and-indent).

C-k

Kill the rest of the current line; before a newline, kill the newline. With prefix argument, kill that many lines from point. Negative arguments kill lines backward (kill-line).

C-l

Clear the screen and reprint everything (recenter).

n C-p

Move cursor vertically up n lines (previous-line).

C-q

Read next input character and insert it. Useful for inserting control characters
(quoted-insert).

C-r

Search backward incrementally (isearch-backward).

C-s

Search forward incrementally (isearch-forward).

n C-t

Interchange characters around point, moving forward one character. With count n, take character before point and drag it forward past n other characters. If no argument and at end of line, the previous two characters are exchanged (transpose-chars).

n C-v

Scroll text upward n lines. If n is not given, scroll near full screen (scroll-up).

C-w

Kill between point and mark. The text is save in the kill ring. The command P or p can retrieve it from kill ring (kill-region).

Insert Mode

You can enter insert mode by one of the following commands. In addition to these, you will enter insert mode if you give a change command with a line command as the motion command. Insert commands are also modifying commands and you can repeat them by the repeat command . (vip-repeat).

i

Enter insert mode at point (vip-insert).

I

Enter insert mode at the first non white character on the line (vip-Insert).

a

Move point forward by one character and then enter insert mode (vip-append).

A

Enter insert mode at end of line (vip-Append).

o

Open a new line below the current line and enter insert mode (vip-open-line).

O

Open a new line above the current line and enter insert mode (vip-Open-line).

C-o

Insert a newline and leave point before it, and then enter insert mode
(vip-open-line-at-point).

Insert mode is almost like emacs mode. Only the following 4 keys behave differently from emacs mode.

ESC

This key will take you back to vi mode (vip-change-mode-to-vi).

C-h

Delete previous character (delete-backward-char).

C-w

Delete previous word (vip-delete-backward-word).

C-z

This key simulates ESC key in emacs mode. For instance, typing C-z x in insert mode iw the same as typing ESC x in emacs mode (vip-ESC).

When you enter insert mode, VIP records point as the start point of insertion, and when you leave insert mode the region between point and start point is saved for later use by repeat command etc. Therefore, repeat command will not really repeat insertion if you move point by emacs commands while in insert mode.

Go to the previous, next section.